Specialty Marketing Inc.
Home :: Home Products :: AC-IC-NC-8E

New Construction Brackets from Atlantic Technology

AC-IC-NC-8E


AC-IC-NC-8E


http://www.atlantictechnology.com/upload/PDFs/manuals/current/IC-NC_w-backbox_manual.pdf
Item Number: AC-IC-NC-8E

Product Description

The bracket is designed to facilitate the installation of the ICTS speakers in new construction projects. The bracket assures that the cutouts for the speakers are the proper size and location. The bracket is designed so that the snapin mesh wings will span studs or joists on either 16" or 24" centers.
 
Locate the New Construction Bracket in front of the Back Box as shown. Use the IC-NC-6 series for Atlantic 6-inch speakers, and the IC-NC-8 series for Atlantic 8-inch speakers and the ICTS-6LCR, as that is built on an 8-inch frame.
 
The flange of the bracket should face down, into the room. Snap the wings into the receptacles on the round plastic frame. Nail or screw through the mesh wings into the joists.
 
Route the speaker wire through any of the four knock-out holes in the back box.
 
When the sheet rock or ceiling tile is installed, the mounting hole for the ceiling speaker may be cut out and the speaker installed as normal with the speaker’s clamping feet.