|
Product Description
The TS‑1D is intended to protect audio input and output circuits from the effects of transients induced on the audio lines.
- Immunity from Electrostatic Discharge
- Immunity from Induced Transient Voltage
- Immunity from RF Interference
- Immunity from Electromagnetic Pulse
- CE Compliance
Audio
- Frequency Response:
10 Hz to 50 kHz (+/‑ 0.25 dB)
- Insertion Loss:
<0.3 dB (into balanced bridging input)
<1.0 dB (into 150 Ω or 600 Ω balanced< input)
< 6 dB (600 Ω balanced source into 600 Ω load)
Electrical- Number of Circuits:
4, independent (for connection as 4 unbalanced or 2 balanced audio lines)
- Equivalent Series Resistance, Input to Output:
20 Ω
- Equivalent Circuit:
300 kHz LP filter, 6 dB/octave, integral shunt high‑voltage switch
- Maximum Working Signal:
30 Vp, 60 V p‑p
- HV Switch Clamp:
24 V actuation; 48 V maximum
- Transient Energy:
0.1 joule
Physical- Case Material:
Electromagnetically inert plastic composition
- Size:
1.75 in. W x 2.5 in. L x 0.9 in. H (4.45 cm x 6.35 cm x 2.29 cm) (including terminal strip)
- Ground Bus (integral):
110 alloy copper, 0.25" W x 1.6" L (.64 cm x 4.1 cm) with 2 mounting holes, #6 (.37 cm) clearance, mounting hardware included
- Input/Output Termination:
#6 (.35 cm) captive screw terminals
GB6 GROUND BAR- Size:
1.5 in. W x 11.87 in. L x .378 in. H (3.81 cm x 30.2 cm x .96 cm)
- Material:
110 Alloy Copper
- EMC Suppression:
IEC 1000‑4‑2 levels 1 through 3 < 1 V
IEC 1000‑4‑3 levels 1 through 3 < 1 V
IEC 1000‑4‑4 levels 1 through 4 < 1 V
- Ambient Operating Environment:
‑10° C to 55° C
|
Shopping Cart
