|
Product Description
Product Features:
- Mono Channel Ultra High Output Audiophile based design
- Designed by Robert Zeff
- Class H switching design
- Microprocessor controlled design
- Microprocessor controlled Code based flashing diagnostics
- Concealed adjustment controls
- 24Db per octave Low pass crossover (Bandwidth limited)
- Internal chassis force cooled design for optimum cooling during peak demand
- Built in Hi-Efficiency microprocessor controlled multi speed Hi-Efficiency quite fan for maximum cooling
- Hi/Low level balanced switchblade RCA inputs for maximum system integration
- RJ45 Ethernet input connections for true balanced input connections
- Block type terminal connections
- 256 color user selectable illumination circuit
- Combined Bias circuit and temperature regulation circuit to regulate bias and lower THD at any point in total thermal cycle
- Microprocessor high voltage power supply allows the amplifier to optimize power output at different ohm loads without the loss of efficiency or sound quality
- Vdrive based preamp stage improves efficiency lower internal signal loss
- Hand picked ultra hi voltage output devices used in the SE4000
- 3 stage bank of self branded ultra low ESR 105 degree Celsius caps increase power reserves for each of the amplifiers 6 voltage rails
- massive combined output inductors eliminate any unwanted A/C ripple in the amplifier increasing the amplifiers stability, while lowering the THD and increasing the S/N ratio.
- Equipped with Dual 1/0 Power and Dual 1/0 Ground Screw Down Compression Block Terminals
- Strapable Design allowing for the linking and connection of two units into one single channel of very high power of output- Capable of over 9000 watts at less than 1% distortion + over 10,000 watts at less than 3% distortion.
Specs:
| 1 Channel @ 4 Ohms- |
1200 Watts |
| 1 Cannel @ 2 ohms |
2300 Watts |
| 1 Channel @ 1 Ohms (Bridged) |
4000 Watts @ .05% THD |
| Frequency Response |
4Hz - 230Hz |
| Crossover Range |
30Hz - 230Hz |
| Bass Boost |
+15dB @ 20Hz - 80Hz |
| S/N Ratio |
80dB |
| Input Sensitivity (Low) |
200mV - 4V |
| Input Senstivity (Bal) |
400mV - 8V |
| MAX Rail Voltage |
+/- 103 Volts |
| Dampening Factor |
1300 |
| Max Current Draw |
5000A @ 5000 Watts 3% THD |
| External Fuse (Recommended) |
2 x 250 Amp |
| Idle Current |
4.0A |
| Dimensions |
31.5"(L) x 10.25"(W) x 3.4"(H) |
|
Shopping Cart
